Oxygen O2 Sensor Fix

Oxygen O2 Sensor Fix

With the use of these adapters you can “often” bypass errors generated by your computers ECU shown as a CEL or check engine light. The spacers change the values being read and reported to the ECU. If you were running without a catalytic converter these could be used to prevent the CEL code from being generated. I was hoping to be able to offer these for sale on Ebay but they are forbidden on the site. If you are interested in picking up these you will probably need to get from Aliexpress.





Most installations require at least 2, please verify that you have the necessary space to install prior to ordering.

Application:

  • For Most Vehicle With M18X1.5 Threads.

Specification:

  • 100% quality assurance tested, more responsive, less expensive, easier to install.
  • Direct replacement, durable and have high strength to use.
  • Prevent certain oil and excess fuel from entering the pipe.
  • Eliminate to checking engine light(CEL) after modifing exhaustor or removing catalytic converter.
  • Solve the problem of  P0420/P0042 codes faulty.
  • Easy installation, direct bolt-on, no modification needed.
  • Material & Color:
  • Material: made of high quality Stainless Steel.
  • Color: as picture.

Package Included:

  • 1xO2 Sensor Spacer. (100% Brand New Never Used Or Installed)

Installation:

  • 1. Remove O2 sensor from the pipe.
  • 2. Bolt in new sensor spacer.
  • 3. Bolt O2 sensor to new spacer by hand firstly.
  • 4. Tighten with a wrench.
  • 5. Do the same on the other side.

Symptom of P0420/P0042 Codes Faulty:

Uses an OBD-II scanner to retrieve trouble codes stored by the Powertrain Control Module (PCM).Faulty catalytic converter is the most common reason to cause fault codes P0420/P0042. There are 4 common indicators of faulty.                                                                                    

  • 1. Check Engine Light is on.                                                                                                          
  • 2. Lack of power after vehicle warms up.                                                                                 
  • 3. Speed of vehicle may not exceed 30-40 mph.                                                                       
  • 4. Rotten egg smell coming from the exhaust pipe.                                                                
  • Install our oxygen sensor adapter could help solve the problem.

Steps Rated Error Codes:

  • P0031-O2 SENSOR 1/1 HEATER CIRCUIT LOW.
  • P0037-O2 SENSOR 1/2 HEATER CIRCUIT LOW.
  • P0051-O2 SENSOR 2/1 HEATER CIRCUIT LOW.
  • P0057-O2 SENSOR 2/2 HEATER CIRCUIT LOW.
  • P0032-O2 SENSOR 1/1 HEATER CIRCUIT HIGH.
  • P0038-O2 SENSOR 1/2 HEATER CIRCUIT HIGH.
  • P0052-O2 SENSOR 2/1 HEATER CIRCUIT HIGH.
  • P0058-O2 SENSOR 2/2 HEATER CIRCUIT HIGH.
  • P0131-O2 SENSOR 1/1 CIRCUIT LOW VOLTAGE.
  • P0137-O2 SENSOR 1/2 CIRCUIT LOW VOLTAGE.
  • P0151-O2 SENSOR 2/1 CIRCUIT LOW VOLTAGE.
  • P0157-O2 SENSOR 2/2 CIRCUIT LOW VOLTAGE.
  • P0132-O2 SENSOR 1/1 CIRCUIT HIGH VOLTAGE.
  • P0138-O2 SENSOR 1/2 CIRCUIT HIGH VOLTAGE.
  • P0152-O2 SENSOR 2/1 CIRCUIT HIGH VOLTAGE.
  • P0158-O2 SENSOR 2/2 CIRCUIT HIGH VOLTAGE.
  • P0133-O2 SENSOR 1/1 SLOW RESPONSE.
  • P0139-O2 SENSOR 1/2 SLOW RESPONSE.
  • P0153-O2 SENSOR 2/1 SLOW RESPONSE.
  • P0159-O2 SENSOR 2/2 SLOW RESPONSE.
  • P0135-O2 SENSOR 1/1 HEATER PERFORMANCE.
  • P0141-O2 SENSOR 1/2 HEATER PERFROMANCE.
  • P0155-O2 SENSOR 2/1 HEATER PERFORMANCE.
  • P0161-O2 SENSOR 2/2 HEATER PERFORMANCE.
  • P0420-CATALYST 1/1 EFFICIENCY.
  • P0430-CATALYST 2/1 EFFICIENCY.

Note:

  • Provide Tracking Number With Every Order, Please Buy With Confidence!
  • No installation guides are included, we highly recommend to seek professional installation. Any damage during installation will not be refunded.
  • Will come with everything you see in the picture. Please allow difference due to manual measurement.
  • Please check that the picture matches before purchase. The color of the actual items may slightly different from the listing images due to different computer screen, thanks for your understanding.